Analyze the precautions in the process of making uPVC Profile

uPVC Profile is widely favored by consumers due to its unique characteristics, so what should be paid attention to in the production process of plastic steel profiles? Henan plastic steel profiles are analyzed for everyone.

1. The cutting needs to have a certain speed to prevent the cutting defects from being too slow. Strictly follow the given length limit, and the length error does not exceed 0.5mm; after cutting, complete the welding within 48 hours, so as not to affect the welding quality due to surface contamination.

2. After the welding is completed, the corner cleaning must be completed within 1-30 minutes. At the end of the glass installation, glass pads should be placed around the sides, and the frame edges should be glued to fix it.

3. The inner cavity of casement windows, sliding windows, etc. must be lined with reinforced steel. Fasteners adopt 4mm large-head tapping screws or self-tapping screws with washers. The hole diameter of the drilled base should not be greater than 3.2mm to ensure tightness.

The above are the precautions for uPVC Profile. Remember the above to ensure the further development of plastic steel profiles.