The physical characteristics of Plastic Profiles are shared here. Jinan Lumei Plastic Profiles manufacturer has a complete production system, excellent quality control, and technical innovation. It is worthy of the support and trust of all customers. If necessary, please feel free to contact us. advisory.

Lumei has been keeping investing on Research and Development Department. 70mm Aluminum clad PVC profiles series was designed by us had applied Innovation patent, which have 6 chambers equipped with triple glazing sealing. 70mm series product innovation perfectly shows the concept of energy saving and environmental protection .

uPVC Door is a new generation of door and window material, which has the advantages of high wind pressure resistance, good air and water tightness, but if you want to extend the service life of plastic steel doors and windows, you should maintain it.

uPVC Profile is based on polyvinyl chloride (UPVC) resin as the main raw material, plus a certain proportion of stabilizers, colorants, fillers, ultraviolet absorbers, etc., extruded into the material, and then cut, welded or screwed Made into door and window frame fans, equipped with sealing strips, wool tops, hardware, etc.

The glass should be flat and firmly installed, and there should be no looseness. The single-layer glass should not directly touch the profile. The inner and outer surfaces of the double-layer glass should be clean. There should be no dust and moisture in the glass interlayer, and the partitions should not be tilted.