Window and Door Profile save energy from those aspects?

Window and Door Profile is based on polyvinyl chloride (UPVC) resin as the main raw material, plus a certain proportion of stabilizers, colorants, fillers, ultraviolet absorbers, etc., are extruded to form the material, and then cut, welded or screwed The door and window frame sashes are made into the door and window frame sashes, equipped with sealing strips, wool tops, hardware, etc.

Window and Door Profile is more and more popular among modern young people because of its beautiful appearance, strong corrosion resistance, good water tightness and heat insulation, and easy maintenance. It is recognized as energy-saving doors and windows in the world. From what convenience do plastic-steel profile doors and windows show energy-saving advantages? Jinan Plastic Steel Profile Manufacturer-Jinan Plastic Steel Profile Company will give you a specific explanation from four aspects.

1. Energy saving in the production process

It is reported that the energy consumption of producing PVC profiles of the same weight is 1/4 of that of steel and 1/8 of that of aluminum.

2. Energy saving during use-good heat preservation and energy saving

The unique material of Window and Door Profile makes it have excellent thermal insulation, and the thermal insulation effect is 1250 times better than aluminum. Coupled with good airtightness, even though it is 30 or 40 degrees outside in the hot summer, indoors is another world.

3. Energy saving during use-excellent airtight performance

Sealing strips are installed on the outside, center and inside of the window sash, the outside is sealed to block rainwater, the inside is sealed to block outdoor air, and the center is sealed to form a cavity, thereby effectively blocking rainwater from entering the room through outdoor wind pressure.

4. Energy saving by recycling

The recycling of Window and Door Profile is more energy-efficient and environmentally friendly. Because plastic-steel doors and windows do not need to go through smelting, ingot casting, rolling and other processes like recycling metal doors and windows, only waste materials are crushed or mixed with new materials to extrude profiles. The recycled materials can be used to make flooring, park benches and other products. .