English
PVC Profiles are widely favored by consumers due to their unique characteristics, so what should be paid attention to during the production of PVC Profiles? Jinan PVC Profiles analyzes for everyone.
1. The cutting needs to have a certain speed to prevent the cutting defects from being too slow. Strictly follow the given length limit, and the length error does not exceed 0.5mm; after cutting, complete the welding within 48 hours to avoid surface contamination affecting the welding quality.
2. After the welding is completed, the corner cleaning must be completed within 1-30 minutes. At the end of the glass installation, glass pads should be placed around the sides, and the frame edges should be glued to fix it.
3. The inner cavity of casement windows, sliding windows, etc. must be lined with reinforced steel. Fasteners adopt 4mm large-head tapping screws or self-tapping screws with washers. The hole diameter of the drilled base should not be greater than 3.2mm to ensure tightness.
The above are the precautions for PVC Profiles. Remember the above items to ensure that PVC Profiles can develop further.
