Glass cutting machine is a kind of glass processing equipment. With the advancement of technology, the types of glass cutting machines will also change, and the law of its development must be towards intelligent development. For example, automatic glass cutting machine. This glass cutting machine goes one step further than semi-automatic glass cutting machines. It consists of a chassis mechanism, a beam mechanism, a glass processing table top, a cutter head mechanism, a conveying mechanism, a mechanical positioning mechanism, an electrical control system, etc., and the structure is complex.
Its processing method is controlled by the computer software equipped with the machine, directly drawing and then implementing the operation. In this way, it is possible to set in advance whether to make square, round or special-shaped glass through the computer, without the need to make molds in advance.
At present, the most advanced form of this cutting machine is the production line mode. In addition to the loading table, the computer cutting machine, and the chip breaking machine, this mode also has an unloading table. The operation of large quantities of glass products, and the maintenance is convenient.
When cutting with an automatic glass cutting machine, it is necessary to perform typesetting first, and then can perform cutting, film removal and other processes. It is not only required to discharge as many pieces that meet the required shape on the original glass sheet as possible to improve the utilization rate of raw materials, but also requires that the typesetting operation is simple and easy to use. Mechanical interactive typesetting is the most commonly used and most convenient typesetting method for operators to perform typesetting and cutting on the job site.
Just mentioned the semi-automatic glass cutting machine. In fact, it is basically the same as the manual cutting machine, but the semi-automatic button operation device is added to the cutting machine. Although it is still mainly used to cut special-shaped glass, it is necessary to make special molds according to the shape of the glass in advance, but the size of the glass that can be processed is larger than that of the manual cutting machine. And because the kinetic energy of the pneumatic plus motor is used when cutting, a lot of manpower is saved, so the production efficiency is much higher than that of the manual cutting machine.
That manual glass cutter. It is the most traditional glass cutting machine. The whole machine includes two parts: a glass conveyor belt and a cutting table. The glass to be cut is transported to the cutting table and cut with a blade by operating the conveyor belt by hand. The advantage of this cutting machine is that it can cut relatively small pieces of special-shaped glass and can process the glass into different shapes. The disadvantage is that when cutting glass into a unique shape, a special mold needs to be made, and the manual operation itself will be time-consuming and laborious, and mass production cannot be achieved.
There is another type, and that is the water jet glass cutter. This glass cutting machine is also fully automatic through computer control. But unlike traditional blade cutting, it uses high-pressure water jet cutting technology, mainly for thicker glass products. Various complex patterns are formed by computer numerical control. This cutting machine performs cold cutting without thermal deformation or thermal effect. It can ensure that the incision is smooth and can be completed at one time without secondary operations. Thanks to these advantages, it can also perform the complex operation of drilling glass.