uPVC Profile has a good corrosion resistance, so the corrosion resistance research of plastic steel doors and windows mainly depends on the choice of hardware, such as corrosion-resistant hardware, stainless steel, and its service life is about 10 times that of steel windows. Now let us see for ourselves how we deal with the effective anti-corrosion problem of the plastic steel profile company. Anti-corrosion treatment of uPVC Profile: In addition to the assembly gap of various plastic steel profiles, it is also necessary to fully consider whether the sealing strip can be uniform and firm. The interface gap should not affect more than 1mm, reflecting the performance of the sealing system of the window. Plastic-steel doors are usually used as inner doors of Chinese buildings, so they do not require high airtightness.
Various gap values are specified in the national standards, but for customers, the smaller the gap value at the joints of various profiles, the tighter the fit and the finer the assembly process, reflecting the assembly level and accuracy of assembly tools. The contact surface of plastic steel doors and windows with cement mortar should be painted with antiseptic for anti-corrosion treatment. Before plastering, plastic steel windows should be protected by plastic film wrapping or pasting. Before doors and windows are installed and indoor and outdoor wet work is completed, the plastic film shall not be damaged. . Prevent the mortar from corroding the surface layer. Before the work is completed, the protective film of the plastic-steel window should be torn off again.. It should be torn off gently. Do not use a spatula to avoid scratching the surface and affecting the appearance. When there is glue on the surface of the plastic-steel window, wipe it with a cotton thread dipped in a special solvent. If you find local scratches, use a small brush dyed with a dye solution.. During scaffolding, outdoor plastering, steel keel installation, pipeline construction and transportation, it is strictly forbidden to wipe or break the plastic steel window frame.. This will protect Our contours are protected from corrosion.
Today, the editor will share with you about the anti-corrosion treatment of uPVC Profile. I hope it can help you. If you have any questions about uPVC Profile, you can consult the Jinan lumei plastic steel profile manufacturer.