Window and Door Profile is the type of doors and windows that modern people like when doing home decoration, especially traditional home building materials are now very popular. Therefore, many people choose to customize doors and windows during the decoration period, and plastic steel doors and windows are also very common in custom building materials. Jinan Plastic Steel Profile Manufacturer-Lumei Plastic Steel Profile Co., Ltd. shares with you the precautions for customizing plastic steel doors and windows, and I hope it will be helpful to everyone.
1. Performance High-quality plastic-steel windows have fine processing, good sealing performance, and open and close; inferior plastic-steel windows have poor processing quality, poor sealing performance, and switch lag.
The strength and wind resistance of steel-lined plastic-steel windows are closely related to steel linings, and steel linings and plastic-steel profiles must be fixed to each other, especially where they are not connected to the wall.
The steel lining is thicker, unable to achieve the expected effect, and the strength is greatly reduced. If the steel lining is unqualified, the screws will fall off, which is very dangerous. Some plastic window processors can save the steel lining and save the cost, and pay special attention to the customized plastic Steel windows.
2. Jinan Plastic Steel Profile Manufacturer-Lumei Plastic Steel Profile Co., Ltd. recommends comprehensive consideration of quality, price, service and other aspects when customizing plastic steel doors and windows.
To choose profiles, we must first understand the PVC profiles selected for plastic steel windows. Pvc profiles are the decisive factor for the quality and grade of plastic steel windows. Good pvc profiles should be reasonably designed with multi-cavity, wall thickness, anti-aging and anti-ultraviolet additives in the formula.
From the outside, the surface should be smooth, the color should be blue, and the middle and low profile profiles should be white and yellow. This color has poor sun protection ability. After a few years, it will turn yellow until it ages, deforms and cracks, the reason is that the formula contains too much calcium.
3. Quality It is necessary to observe whether there are obvious scratches, grooves, cracks at the welding corners, etc. on the surface of the plastic steel window. For residential buildings with high outdoor noise, it is recommended to use plastic steel windows with hollow glass to obtain better sealing and sound insulation effects.
Custom steel doors and windows installation and acceptance note: ①When the plastic steel window is closed, there is no gap between the fan and the frame, and the push-pull plastic steel window should slide freely, the sound is soft, and there is no dust falling;
②Plastic steel window screen is indispensable. Many people think that wire mesh is durable. In fact, gauze is more practical. Its material is not rusty, and it is not easy to use for many years. The price is slightly more expensive;
③The acceptance after installation of plastic steel windows cannot be ignored. Pay attention to these small parts during acceptance.