In the process of industrial aluminum processing, the use of aluminum cutting machine is indispensable. Using the new operation mode of the equipment can well cut a reasonable angle and size according to the actual use. For users, in order to make their operation process smoother, it is indispensable to understand the operation process of a certain aluminum cutting machine. Below, Shanghai Xinchi will share with you the various details:
before work
Before operating the aluminum cutting machine, do not rush to start the machine, but carry out a reasonable inspection, including analysis and inspection of the power switch of the equipment and whether the installation of the saw blade is tight, etc. At the same time, the safety measures of the equipment cannot be ignored during the inspection. items, including equipment shields and safety baffles. At the same time, the operating table of the aluminum cutting machine must be in a good and stable state, and the equipment needs to have corresponding lighting auxiliary measures when working at night. When debugging the equipment, you can turn on the main switch of the aluminum cutting machine, turn it for 20 seconds and confirm the safety before starting.
when working
When operating the aluminum cutting machine, especially when it is in contact with the cutting part, it is not allowed to operate with gloves, and the safety protection measures of the equipment need to be roughly sorted out. Especially in the process of cutting equipment, some dust will be generated to infect the respiratory tract, so wear protective measures such as masks. The cutting workpiece of the aluminum cutting machine has strict requirements. Do not try to cut the workpiece with a small space and a short length. The operation process of the general specific type of aluminum cutting machine has requirements for various processing ranges and material conditions. Another major detail worth paying attention to is that the general aluminum cutting machine will take about 10 seconds to reach full speed when running, so there is a waiting process when using the equipment.
After work
After the use of the equipment, many users ignore the operation process of the aluminum cutting machine. Generally, after the equipment is used, the various parts above are generally cleaned, and the equipment is packed according to the correct storage habits, and the power of the equipment is turned off.
In short, there are many details in the operation process of the aluminum cutting machine worthy of attention. Correctly mastering the corresponding operation knowledge will help you to use the equipment better. At the same time, the safety of the equipment should not be forgotten in the process of using the equipment, which is also a matter worthy of the attention of many users. If you are interested in our products, you are welcome to read "How to choose the right blade for your aluminum cutting machine" ?"