English
 |
| Quantity: | |
|---|---|
Lumei UPVC profiles are divided into 60/65 / 70mm casement series, 80mm and 88mm sliding series, and series of PVCprofiles include ASA and PMMA double-colored co-extruded profile, whole body colored profile, faux wood profile, soft-hard co- extruded profile, wire drawing profile, embossing profile, and uvioresistant profile etc. Our PVC profiles adopts Ca-Zn formula and choose quality raw materials including non-toxic heat Stabilizer, imported titanium dioxide powder, ultraviolet absorber, oxidation inhibitor, etc, .which ensure that all technical performance of products conform to national energy conservation and environmental protection indexes.
Lumei UPVC profiles apply advanced diversified surface treatment technologies and treatment technologies of colorful surface design such as doubled-colored co-extrusion, wire drawing, embossing and laminating. With advancing design concept, beautiful and utility finished products and smooth, glossy and colorful product surface, the overall solutions of colorful decoration can meet the requirements of all grades and individualization better.
Wire Drawing UPVC Profile - Not only improve scratch resistance capability, but also highlight metal texture of products; enhance the sense of beauty of product appearance and aging resistance performance, and finally upgrade product quality.
Embossing UPVC Profiles - Show external appearance of film coating profiles and have special appearance effect of embossing and clear texture, and also smooth touching effect; Meanwhile, weather resistance and stain-resistant copacities, and product quality have all been improved.
Laminated Films UPVC Profiles - Product appearance has been diversified, and the aging resistance and acid and alkali resistance performance have been improved greatly, which shows the grave and elegant features of various kinds of wood and stone grain.
Fluorine Carbon Spraying UPVC Profiles - Material surface has a strong resistance, resistance to atmospheric pollution, (acid rain, etc.) of corrosion resistance, UV resistance is strong, strong crack resistance and to withstand severe weather conditions. It is beyond general profile.
Double-Colored Co-Extrusion UPVC Profiles - Have excellent weather resistance, high hardness, aging resistance properties and olor stability with long-term exposure to ultraviolet rays; the properties fully meet the relevant product standards.
Rubber Strip Co-Extrusion UPVC Profiles - Achieve integrated production of sealing rubber strip and profile, remarkably improve water tightness, gas tightness and permeability, and overcome the problem that the sealing rubber strip with defects of shrinkage and non-tight must be added at the last of the production of windows and doors.
Lumei 65mm casement PVC windows are mainly for cold area and high-grade building.It can fully meet the requirements of energy saving, and insulation is a real expert.At the same time, separation of steel lining and drainage cavity can make them independent. This design improves the service life of the windows.
1. Adopts visual surface thickness class B standard, to meet the national standard.
2. Large section and large thickness, high strength to ensure the doors and windows.
3. Main profile for five chamber structure, heat preservation performance.
4. With three seal between frame and door and better reflects the superiority of watertight and airtight of window.
Lumei is an one-stop solution for UPVC Windows and Doors in China. Except the UPVC Profiles, Final made UPVC Windows and Doors, our plant produce Window and Door accessories, such as, Sliding Sash Window Pulley, Window Handles, PVC Door Handles, PVC Sash Wheel, Window Hinges and Window gaskets.
| Glass type | Clear Glass, Tempered Glass, Frosted Glass, Laminated Glass, Low-e Glass, Insulated Glass, Reflective Glass, Colored Glass, etc. |
| Thickness | 4mm, 5mm, 6mm, 8mm, 5 + 9 + 5mm, 4 + 8 + 4mm, 5 + 12 + 5mm, 6 + 12 + 6mm, 5 + 9 + 5 + 9 + 5mm, 6 + 12 + 6 + 12 + 6mm, etc |
| Gas for Insulated Glass | Ar, Kr |
| Glass Color | Custom made |
A. T / T & L / C
B. Within 15 days after receiving 50% deposit of T / T
C. Plastic bags as customers' requirements
D. Samples can be provided freely to test our products quality
E. The usual container: 20GP (can load 8-11 tons, the delivery time about 7-10 days)
40 HQ (can load 24-26 tons, the delivery time about 10-15 days)
Q: Are you trading company or manufacturer?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples? is it free or extra?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How to order?
A: Please send us your purchase order by Email or Fax, We need to know the following information for your order:
1) Product information: Order Quantity, Specification (size, material, color, length, Design styles),
Artwork or Sample will be the best.
2) Delivery time required.
3) Shipping information: Address, Phone number, Destination seaport / airport.
4) Forwarder's contact details if there is any in China.
5. Q: What is the payment terms of order amount?
A: We accept T / T or L / C at sight.
6. Q: Can I put the logo or company name on the products?
A: Sure. We will follow your request to produce your personal brand profiles.
Lumei UPVC profiles are divided into 60/65 / 70mm casement series, 80mm and 88mm sliding series, and series of PVCprofiles include ASA and PMMA double-colored co-extruded profile, whole body colored profile, faux wood profile, soft-hard co- extruded profile, wire drawing profile, embossing profile, and uvioresistant profile etc. Our PVC profiles adopts Ca-Zn formula and choose quality raw materials including non-toxic heat Stabilizer, imported titanium dioxide powder, ultraviolet absorber, oxidation inhibitor, etc, .which ensure that all technical performance of products conform to national energy conservation and environmental protection indexes.
Lumei UPVC profiles apply advanced diversified surface treatment technologies and treatment technologies of colorful surface design such as doubled-colored co-extrusion, wire drawing, embossing and laminating. With advancing design concept, beautiful and utility finished products and smooth, glossy and colorful product surface, the overall solutions of colorful decoration can meet the requirements of all grades and individualization better.
Wire Drawing UPVC Profile - Not only improve scratch resistance capability, but also highlight metal texture of products; enhance the sense of beauty of product appearance and aging resistance performance, and finally upgrade product quality.
Embossing UPVC Profiles - Show external appearance of film coating profiles and have special appearance effect of embossing and clear texture, and also smooth touching effect; Meanwhile, weather resistance and stain-resistant copacities, and product quality have all been improved.
Laminated Films UPVC Profiles - Product appearance has been diversified, and the aging resistance and acid and alkali resistance performance have been improved greatly, which shows the grave and elegant features of various kinds of wood and stone grain.
Fluorine Carbon Spraying UPVC Profiles - Material surface has a strong resistance, resistance to atmospheric pollution, (acid rain, etc.) of corrosion resistance, UV resistance is strong, strong crack resistance and to withstand severe weather conditions. It is beyond general profile.
Double-Colored Co-Extrusion UPVC Profiles - Have excellent weather resistance, high hardness, aging resistance properties and olor stability with long-term exposure to ultraviolet rays; the properties fully meet the relevant product standards.
Rubber Strip Co-Extrusion UPVC Profiles - Achieve integrated production of sealing rubber strip and profile, remarkably improve water tightness, gas tightness and permeability, and overcome the problem that the sealing rubber strip with defects of shrinkage and non-tight must be added at the last of the production of windows and doors.
Lumei 65mm casement PVC windows are mainly for cold area and high-grade building.It can fully meet the requirements of energy saving, and insulation is a real expert.At the same time, separation of steel lining and drainage cavity can make them independent. This design improves the service life of the windows.
1. Adopts visual surface thickness class B standard, to meet the national standard.
2. Large section and large thickness, high strength to ensure the doors and windows.
3. Main profile for five chamber structure, heat preservation performance.
4. With three seal between frame and door and better reflects the superiority of watertight and airtight of window.
Lumei is an one-stop solution for UPVC Windows and Doors in China. Except the UPVC Profiles, Final made UPVC Windows and Doors, our plant produce Window and Door accessories, such as, Sliding Sash Window Pulley, Window Handles, PVC Door Handles, PVC Sash Wheel, Window Hinges and Window gaskets.
| Glass type | Clear Glass, Tempered Glass, Frosted Glass, Laminated Glass, Low-e Glass, Insulated Glass, Reflective Glass, Colored Glass, etc. |
| Thickness | 4mm, 5mm, 6mm, 8mm, 5 + 9 + 5mm, 4 + 8 + 4mm, 5 + 12 + 5mm, 6 + 12 + 6mm, 5 + 9 + 5 + 9 + 5mm, 6 + 12 + 6 + 12 + 6mm, etc |
| Gas for Insulated Glass | Ar, Kr |
| Glass Color | Custom made |
A. T / T & L / C
B. Within 15 days after receiving 50% deposit of T / T
C. Plastic bags as customers' requirements
D. Samples can be provided freely to test our products quality
E. The usual container: 20GP (can load 8-11 tons, the delivery time about 7-10 days)
40 HQ (can load 24-26 tons, the delivery time about 10-15 days)
Q: Are you trading company or manufacturer?
A: We are factory.
Q: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples? is it free or extra?
A: Yes, we could offer the sample for free charge but do not pay the cost of freight.
Q: How to order?
A: Please send us your purchase order by Email or Fax, We need to know the following information for your order:
1) Product information: Order Quantity, Specification (size, material, color, length, Design styles),
Artwork or Sample will be the best.
2) Delivery time required.
3) Shipping information: Address, Phone number, Destination seaport / airport.
4) Forwarder's contact details if there is any in China.
5. Q: What is the payment terms of order amount?
A: We accept T / T or L / C at sight.
6. Q: Can I put the logo or company name on the products?
A: Sure. We will follow your request to produce your personal brand profiles.
